• Home|
  • Services|
  • Compressed Air Piping Installation

Compressed Air Piping Installation

Compressed Air Piping Installation - Air Compressor Service Nepal | AP Compressors
Air Distribution Network

Compressed air pipeline design and installation for clean, low-drop air at every workstation

A poorly designed pipeline network can waste all the efficiency gains from a premium compressor. Undersized pipework, long dead-end branches, corroded galvanized internals, and missing drain points all drive up pressure drop, moisture levels, and maintenance costs. AP Compressors designs and installs aluminium and MS compressed air distribution networks for factories across Nepal, including new builds, capacity expansions, and full repiping of ageing galvanized systems.

  • Ring main layout design eliminates one-way pressure drop across long distribution runs
  • Aluminium pipe resists internal corrosion, keeps air clean, and is easy to extend when your plant grows
  • Pipework sized to your current CFM demand with headroom for planned expansion

24/7 emergency response & trained compressor service technicians in Nepal

What is included

  • Ring main layout design eliminates one-way pressure drop across long distribution runs
  • Aluminium pipe resists internal corrosion, keeps air clean, and is easy to extend when your plant grows
  • Pipework sized to your current CFM demand with headroom for planned expansion
  • Properly sloped drop legs and automatic drain points prevent moisture accumulation in lines
  • Isolation valves at key branches allow maintenance without full system shutdown
  • Full pressure test on completed network before connection to the compressor system
  • As-built drawing provided after installation for future reference and extensions

Service overview

MaterialsAluminium, MS, or stainless steel pipe
LayoutsRing main, branched, or hybrid distribution
IncludesValves, drop legs, drains, hangers, as-built drawing
CoverageNepal-wide for factories of all sizes

How it works

1

Network Design

We design the ring main or branched layout based on your plant floor plan, CFM demand at each point, and acceptable pressure drop.

2

Material Selection

Aluminium, MS, or stainless pipe selected based on air quality, pressure, budget, and installation environment.

3

Installation

Pipe runs, fittings, hangers, isolation valves, drop legs, and condensate drain points installed per the agreed layout.

4

Pressure Test

Completed network pressure tested at 1.5x working pressure, held for a defined period, and checked for leaks before commissioning.

5

Commission & Document

System charged, pressure and flow verified at key points, drains confirmed functional, and as-built drawing handed over.

Air Compressor Service Support Nepal

Get Started

Ready to arrange this service for your plant?

Share your location and requirements — our team will confirm availability and provide a clear plan.

Call Now
Call: 9806922190
WhatsApp Service

Support & Answers

Frequently Asked Questions

Find answers about our air compressors, air dryers, filters, customized compressed air solutions, installation, and maintenance services.

Reach out to our team

Aluminium is corrosion-resistant, keeps internal surfaces clean, and is easy to modify or extend as your plant changes. MS pipe is lower cost for large-diameter mains. The right choice depends on your air quality requirements, budget, and how often you expect the layout to change.

A ring main is a closed-loop distribution network where air can flow from either direction to any take-off point. This design significantly reduces pressure drop under fluctuating load compared to a simple branched network, and gives better pressure consistency at all workstations.

Yes. We assess your current network, identify high-pressure-drop sections and corroded runs, and replace or extend with new aluminium or MS pipework while coordinating the work to keep production disruption minimal.

WhatsApp
Brochure